Home > New EDM Machines > Koton EDM Machines > Conventional Series
Conventional Series
Drilling Electric Discharge Machine
- Conventional Drilling EDM
- Capable of drilling at any angle, into curved surfaces, and irregular shapes
- Designed for drilling hardened tool steel, carbides and other conductive materials
- Drilling capacity from 0.2 mm to 3.0 mm diameter brass or copper electrode tubes
- The flushing medium used by this machine is distilled water – environment friendly
- Automatic pressure release function is used in the system
- The long life worktable is made of stainless steel
KTH-605
Features
- Suitable for bigger workpiece and plastic mould
- Capable of drilling at any angle, into curved surfaces, and irregular shapes
- Precision servo motor control for stable drilling
- Designed for drilling hardened tool steel, carbides and other conductive materials
- Drilling capacity from 0.2 mm to 3.0 mm diameter brass or copper electrode tubes
- flushing medium used by this machine is distilled water – environment friendly
- Automatic pressure release function is used in the system
- The long life worktable is made of stainless steel
Specifications
| Work table dimension |
mm |
800 x 450 |
| Max. Workpiece dimension |
mm |
1000 x 500 |
| Table travel X / Y |
mm |
600 x 400 |
| Z1+Z2 axis travel |
mm |
345 + 250 |
| Ram servo travel |
mm |
350 |
| Max. Length of electrode |
mm |
400 |
| Min. Electrode diameter |
mm |
Ø 0.2 ~ Ø 3.0 |
| Max. Workpiece weight |
kgs |
300 |
| Dielectric |
- |
Water |
| Capacity of dielectric |
litres |
20 |
| Machine weight (nw / gw) |
kg |
2100 / 2200 (Machine) |
| 60 / 70 (Electrical Control Box) |
|
|
| Packing dimension |
mm |
1800 x 1500 x 2230 (Machine) |
| 900 x 800 x 1700 (Electrical Control Box) |
|
|
| Max. Current |
A |
25 |
| Peak current setting (ip) |
steps |
6 |
| Pulse on-time setting |
steps |
9 |
| Pulse off-time setting |
steps |
9 |
| High volts |
steps |
3 |
| Power input |
V |
220 / 380 / 415 |
| Max. Rating power |
KVA |
4 |
Accessories
| 5μ 2 axis optical scale and monitor |
Yes |
| Precision electrode collet jig Ø 0.1~Ø 3.0mm |
Yes |
| Electrode pipe guide Ø 1.0mm |
Yes |
| Electrode tube Ø 1.0mm x 10 |
Yes |
| Halogen work lamp |
Yes |
| Tool box x 1 |
Yes |
| Filter x 2 |
Yes |
| Parallel block 1set |
Yes |
| X, Y, Z axis precision ball screw |
Yes |
| Auto pressure release pump x 1 |
Yes |
| X, Y, Z axis precision servo motor |
Z axis |
KTH-405
Features
- Capable of drilling at any angle, into curved surfaces, and irregular shapes
- Precision servo motor control for stable drilling
- Designed for drilling hardened tool steel, carbides and other conductive materials
- Suitable for bigger workpiece and plastic mould
- Drilling capacity from 0.15 mm to 3.0 mm diameter brass or copper electrode tubes
- The flushing medium used by this machine is distilled water – environment friendly
- Automatic pressure release function is used in the system
- The long life worktable is made of stainless steel
Specifications
| Work table dimension |
mm |
600 x 300 |
| Max. Workpiece dimension |
mm |
1000 x 500 |
| Table travel X / Y |
mm |
450 x 350 |
| Z axis travel |
mm |
350 |
| Ram servo travel |
mm |
350 |
| Max. Length of electrode |
mm |
400 |
| Min. Electrode diameter |
mm |
Ø 0.2 ~ Ø 3.0 |
| Max. Workpiece weight |
kgs |
300 |
| Dielectric |
- |
Water |
| Capacity of dielectric |
litres |
20 |
| Machine weight (nw / gw) |
kg |
1000 / 1100 |
| Packing dimension |
mm |
1450 x 1450 x 2210 |
| Max. Current |
A |
25 |
| Peak current setting (ip) |
steps |
6 |
| Pulse on-time setting |
steps |
9 |
| Pulse off-time setting |
steps |
9 |
| High volts |
steps |
3 |
| Power input |
V |
220 / 380 / 415 |
| Max. Rating power |
KVA |
4 |
Accessories
| 5μ 2 axis optical scale and monitor |
Yes |
| Precision electrode collet jig Ø 0.1~Ø 3.0mm |
Yes |
| Electrode pipe guide Ø 1.0mm |
Yes |
| Electrode tube Ø 1.0mm x 10 |
Yes |
| Halogen work lamp |
Yes |
| Tool box x 1 |
Yes |
| Filter x 2 |
Yes |
| Parallel block 1set |
Yes |
| X, Y, Z axis precision ball screw |
Yes |
| Auto pressure release pump x 1 |
Yes |
| X, Y, Z axis precision servo motor |
Z axis |
KTH-305
Features
- Capable of drilling at any angle, into curved surfaces, and irregular shapes
- Precision servo motor control for stable drilling
- Designed for drilling hardened tool steel, carbides and other conductive materials
- Drilling capacity from 0.15 mm to 3.0 mm diameter brass or copper electrode tubes
- The flushing medium used by this machine is distilled water – environment friendly
- Automatic pressure release function is used in the system
- The long life worktable is made of stainless steel
Specifications
| Work table dimension |
mm |
500 x 300 |
| Max. Workpiece dimension |
mm |
875 x 470 |
| Table travel X / Y |
mm |
350 x 250 |
| Z axis travel |
mm |
350 |
| Ram servo travel |
mm |
350 |
| Max. Length of electrode |
mm |
400 |
| Min. Electrode diameter |
mm |
Ø 0.2 ~ Ø 3.0 |
| Max. Workpiece weight |
kgs |
150 |
| Dielectric |
- |
Water |
| Capacity of dielectric |
litres |
20 |
| Machine weight (nw / gw) |
kg |
800 / 900 |
| Packing dimension |
mm |
1240 x 1210 x 2240 |
| Max. Current |
A |
25 |
| Peak current setting (ip) |
steps |
6 |
| Pulse on-time setting |
steps |
9 |
| Pulse off-time setting |
steps |
9 |
| High volts |
steps |
3 |
| Power input |
V |
220 / 380 / 415 |
| Max. Rating power |
KVA |
4 |
Accessories
| 5μ 2 axis optical scale and monitor |
Yes |
| Precision electrode collet jig Ø 0.1~Ø 3.0mm |
Yes |
| Electrode pipe guide Ø 1.0mm |
Yes |
| Electrode tube Ø 1.0mm x 10 |
Yes |
| Halogen work lamp |
Yes |
| Tool box x 1 |
Yes |
| Filter x 2 |
Yes |
| Parallel block 1set |
Yes |
| X, Y, Z axis precision ball screw |
Yes |
| Auto pressure release pump x 1 |
Yes |
| X, Y, Z axis precision servo motor |
Z axis |
KTH-205
Features
- Capable of drilling at any angle, into curved surfaces, and irregular shapes
- Precision servo motor control for stable drilling
- Designed for drilling hardened tool steel, carbides and other conductive materials
- Suitable for general punching mould
- Drilling capacity from 0.15 mm to 3.0 mm diameter brass or copper electrode tubes
- The flushing medium used by this machine is distilled water – environment friendly
- Automatic pressure release function is used in the system
- The long life worktable is made of stainless steel
Specifications
| Work table dimension |
mm |
500 x 300 |
| Max. Workpiece dimension |
mm |
875 x 470 |
| Table travel X / Y |
mm |
350 x 250 |
| Z axis travel |
mm |
350 |
| Ram servo travel |
mm |
150 |
| Max. Length of electrode |
mm |
400 |
| Min. Electrode diameter |
mm |
Ø 0.2 ~ Ø 3.0 |
| Max. Workpiece weight |
kgs |
150 |
| Dielectric |
- |
Water |
| Capacity of dielectric |
litres |
20 |
| Machine weight (nw / gw) |
kg |
750 / 850 |
| Packing dimension |
mm |
1240 x 1210 x 2240 |
| Max. Current |
A |
25 |
| Peak current setting (ip) |
steps |
6 |
| Pulse on-time setting |
steps |
9 |
| Pulse off-time setting |
steps |
9 |
| High volts |
steps |
3 |
| Power input |
V |
220 / 380 / 415 |
| Max. Rating power |
KVA |
4 |
Accessories
| 5μ 2 axis optical scale and monitor |
Yes |
| Precision electrode collet jig Ø 0.1~Ø 3.0mm |
Yes |
| Electrode pipe guide Ø 1.0mm |
Yes |
| Electrode tube Ø 1.0mm x 10 |
Yes |
| Halogen work lamp |
Yes |
| Tool box x 1 |
Yes |
| Filter x 2 |
Yes |
| Parallel block 1set |
Yes |
| X, Y, Z axis precision ball screw |
Yes |
| Auto pressure release pump x 1 |
Yes |
| X, Y, Z axis precision servo motor |
Z axis |
KTH-200 and 200A
Features
- Capable of drilling at any angle, into curved surfaces, and irregular shapes
- Precision servo motor control for stable drilling
- Designed for drilling hardened tool steel, carbides and other conductive materials
- Suitable for small workpiece and components
- Drilling capacity from 0.15 mm to 3.0 mm diameter brass or copper electrode tubes
- The flushing medium used by this machine is distilled water – environment friendly
- Automatic pressure release function is used in the system
- The long life worktable is made of stainless steel
Specifications
| Work table dimension |
mm |
460 x 210 |
| Max. Workpiece dimension |
mm |
630 x 420 |
| Table travel X / Y |
mm |
300 x 200 |
| Z axis travel |
mm |
350 |
| Ram servo travel |
mm |
330 |
| Max. Length of electrode |
mm |
400 |
| Min. Electrode diameter |
mm |
Ø 0.2 ~ Ø 3.0 |
| Max. Workpiece weight |
kgs |
80 |
| Dielectric |
- |
Water |
| Capacity of dielectric |
litres |
20 |
| Machine weight (nw / gw) |
kg |
550 / 650 |
| Packing dimension |
mm |
1240 x 1210 x 2240 |
| Max. Current |
A |
25 |
| Peak current setting (ip) |
steps |
6 |
| Pulse on-time setting |
steps |
9 |
| Pulse off-time setting |
steps |
9 |
| High volts |
steps |
3 |
| Power input |
V |
220 / 380 / 415 |
| Max. Rating power |
KVA |
4 |
Accessories
| 5μ 2 axis optical scale and monitor |
Yes |
| Precision electrode collet jig Ø 0.1~Ø 3.0mm |
Yes |
| Electrode pipe guide Ø 1.0mm |
Yes |
| Electrode tube Ø 1.0mm x 10 |
Yes |
| Halogen work lamp |
Yes |
| Tool box x 1 |
Yes |
| Filter x 2 |
Yes |
| Parallel block 1set |
Yes |
| X, Y, Z axis precision ball screw |
Yes |
| Auto pressure release pump x 1 |
Yes |
| X, Y, Z axis precision servo motor |
Z axis |
* The manufacturer reserves the right to modify the designs, specifications, mechanisms etc of the machines without notice, all the specifications shown above are just for reference.
