ATC Series

KTH-540ATC
KTH-506ATC
KTH-430ATC
KTH-305ATC

Automatically change copper drilling EDM

KTC-430ATC type and above Drilling EDM use linear guides and roller bearings, very fast, completely stable and accurate
This series including three types: 1. C-type; 2. Travelling head; 3. Double column
Automatic 16 and 30 copper tube changers available
Drilling capacity from 0.2 mm to 3.0 mm diameter brass or copper electrode tubes
Direct read-out of wire cutting NC program. Can support two machine uses in one
Perfectly accurate machining, avoids worker inattention
Fast electrical discharge, fast motion, reduces production time
Can edit or import processing coordinates via computer without NC programmer present
The flushing medium used by this machine is distilled water – environment friendly

KTC-540ATC

Features

Automatic 16 and 30 copper tube changers available
Precision servo motors on X, Y, Z axes provide excellent stability during drilling
Provide 1μ optical scale, linear slideway and ballscrew ensure very accurate movements
Spindle shaper head, X and Y axes motion on head, fixed bed; for automotive applications and other small bore machining on sheet metal moulds/dies
Automatic copper tube deviation correction
NC program G-code and DXF files could be directly read; automatically finds the start cutting point and begins a fine hole drilling process
The machining coordinate can be input directly when NC program is not available
Automatic edge, internal diameter finding, and centering
Coordinates can rotate at any angle
Mirror image function
Drilling capacity from 0.2 mm to 3.0 mm diameter brass or copper electrode tubes
Automatic illustrates the path of current and next drilling position with colour
Z axis auto reset and depth calculation (Z axis automatically checks depths of holes, and returns to complete any that are too shallow)
The flushing medium used by this machine is distilled water – environment friendly
Data could be input by 3.5" floppy, USB, or transfer through RS232
Direct and easy learning dialogue operation interface

Specifications

Work table dimension	mm	600 x 490
Max. Workpiece dimension	mm	1185 x 740
Table travel X / Y	mm	500 x 400
Z axis travel	mm	350
Ram servo travel	mm	350
Max. Length of electrode	mm	400
Min. Electrode diameter	mm	Ø 0.2 ~ Ø 3.0
Max. Workpiece weight	kgs	500
Dielectric	-	Water
Capacity of dielectric	litres	100
Machine weight (nw / gw)	kg	2100 / 2300
Packing dimension	mm	2300 x 1800 x 2240
Machine structure	-	Travelling Head
Max. Current	A	25
Peak current setting (ip)	steps	6
Pulse on-time setting	steps	9
Pulse off-time setting	steps	9
High volts	steps	3
Power input	V	220/ 380/ 415
Max. Rating power	KVA	4

Accessories

Electrode pipe guide Ø 1.0mm	Yes
Electrode tube Ø 1.0mm x 10	Yes
Halogen work lamp	Yes
Tool box x 1	Yes
Filter x 2	Yes
Parallel block 1set	Yes
X, Y, Z axis precision ball screw	Yes
Auto pressure release pump x 1	Yes
X, Y, Z axis precision servo motor	Yes
1μ 2 axis optical scale and LCD	Yes
X, Y, Z axis hand wheel	Yes
3.5" floppy or USB	Yes
RS232 transfer	Yes
X, Y, Z axis linear guideway	For KTC 430 and above
Electrode auto change system	Yes
Collet	Yes

KTH-506ATC

Features

Automatic 16 and 30 copper tube changers available
Precision servo motors on X, Y, Z axes provide excellent stability during drilling
Provide 1μ optical scale, linear slideway and ballscrew ensure very accurate movements
Automatic copper tube deviation correction
NC program G-code and DXF files could be directly read; automatically finds the start cutting point and begins a fine hole drilling process
The machining coordinate can be input directly when NC program is not available.
Automatic edge, internal diameter finding, and centering
Coordinates can rotate at any angle
Mirror image function
Drilling capacity from 0.2 mm to 3.0 mm diameter brass or copper electrode tubes
Automatic illustrates the path of current and next drilling position with colour
Z axis auto reset and depth calculation (Z axis automatically checks depths of holes, and returns to complete any that are too shallow)
The flushing medium used by this machine is distilled water – environment friendly
Data could be input by 3.5" floppy, USB, or transfer through RS232
Direct and easy learning dialogue operation interface

Specifications

Work table dimension	mm	600 x 700
Max. Workpiece dimension	mm	800 x 1120
Table travel X / Y	mm	500 x 600
Z axis travel	mm	350
Ram servo travel	mm	350
Max. Length of electrode	mm	400
Min. Electrode diameter	mm	Ø 0.2 ~ Ø 3.0
Max. Workpiece weight	kgs	500
Dielectric	-	Water
Capacity of dielectric	litres	100
Machine weight (nw / gw)	kg	2300 / 2500
Packing dimension	mm	1900 x 1700 x 2400
Machine structure	-	Double Column
Max. Current	A	25
Peak current setting (ip)	steps	6
Pulse on-time setting	steps	9
Pulse off-time setting	steps	9
High volts	steps	3
Power input	V	220 / 380 / 415
Max. Rating power	KVA	4

Accessories

Electrode pipe guide Ø 1.0mm	Yes
Electrode tube Ø 1.0mm x 10	Yes
Halogen work lamp	Yes
Tool box x 1	Yes
Filter x 2	Yes
Parallel block 1set	Yes
X, Y, Z axis precision ball screw	Yes
Auto pressure release pump x 1	Yes
X, Y, Z axis precision servo motor	Yes
1μ 2 axis optical scale and LCD	Yes
X, Y, Z axis hand wheel	Yes
3.5" floppy or USB	Yes
RS232 transfer	Yes
X, Y, Z axis linear guideway	For KTC 430 and above
Electrode auto change system	Yes
Collet	Yes

KTC-430ATC

Features

Automatic 16 and 30 copper tube changers available
Precision servo motors on X, Y, Z axes provide excellent stability during drilling
Provide 1μ optical scale, linear slideway and ballscrew ensure very accurate movements
Spindle shaper head, X and Y axes motion on head, fixed bed; for automotive applications and other small bore machining on sheet metal moulds/dies
Automatic copper tube deviation correction
NC program G-code and DXF files could be directly read; automatically finds the start cutting point and begins a fine hole drilling process
The machining coordinate can be input directly when NC program is not available
Automatic edge, internal diameter finding, and centering
Coordinates can rotate at any angle
Mirror image function
Drilling capacity from 0.2 mm to 3.0 mm diameter brass or copper electrode tubes
Automatic illustrates the path of current and next drilling position with colour
Z axis auto reset and depth calculation (Z axis automatically checks depths of holes, and returns to complete any that are too shallow)
The flushing medium used by this machine is distilled water – environment friendly
Data could be input by 3.5" floppy, USB, or transfer through RS232
Direct and easy learning dialogue operation interface

Specifications

Work table dimension	mm	515 x 390
Max. Workpiece dimension	mm	975 x 740
Table travel X / Y	mm	400 x 300
Z axis travel	mm	350
Ram servo travel	mm	350
Max. Length of electrode	mm	400
Min. Electrode diameter	mm	Ø 0.2 ~ Ø 3.0
Max. Workpiece weight	kgs	500
Dielectric	-	Water
Capacity of dielectric	litres	100
Machine weight (nw / gw)	kg	2000 / 2200
Packing dimension	mm	2300 x 1800 x 2240
Machine structure	-	Travelling Head
Max. Current	A	25
Peak current setting (ip)	steps	6
Pulse on-time setting	steps	9
Pulse off-time setting	steps	9
High volts	steps	3
Power input	V	220 / 380 / 415
Max. Rating power	KVA	4

Accessories

Electrode pipe guide Ø 1.0mm	Yes
Electrode tube Ø 1.0mm x 10	Yes
Halogen work lamp	Yes
Tool box x 1	Yes
Filter x 2	Yes
Parallel block 1set	Yes
X, Y, Z axis precision ball screw	Yes
Auto pressure release pump x 1	Yes
X, Y, Z axis precision servo motor	Yes
1μ 2 axis optical scale and LCD	Yes
X, Y, Z axis hand wheel	Yes
3.5" floppy or USB	Yes
RS232 transfer	Yes
X, Y, Z axis linear guideway	For KTC 430 and above
Electrode auto change system	Yes
Collet	Yes

KTH-305ATC

Features

Automatic 16 and 30 copper tube changers available
Precision servo motors on X, Y, Z axes provide excellent stability during drilling
Provide 1μ optical scale, linear slideway and ballscrew ensure very accurate movements
C type structure
Automatic copper tube deviation correction
NC program G-code and DXF files could be directly read; automatically finds the start cutting point and begins a fine hole drilling process
The machining coordinate can be input directly when NC program is not available.
Automatic edge, internal diameter finding, and centering
Coordinates can rotate at any angle
Mirror image function
Drilling capacity from 0.2 mm to 3.0 mm diameter brass or copper electrode tubes
Automatic illustrates the path of current and next drilling position with colour
Z axis auto reset and depth calculation (Z axis automatically checks depths of holes, and returns to complete any that are too shallow)
The flushing medium used by this machine is distilled water – environment friendly
Data could be input by 3.5" floppy, USB, or transfer through RS232
Direct and easy learning dialogue operation interface

Specifications

Work table dimension	mm	500 x 300
Max. Workpiece dimension	mm	990 x 490
Table travel X / Y	mm	350 x 250
Z axis travel	mm	350
Ram servo travel	mm	150
Max. Length of electrode	mm	400
Min. Electrode diameter	mm	Ø 0.2 ~ Ø 3.0
Max. Workpiece weight	kgs	150
Dielectric	-	Water
Capacity of dielectric	litres	100
Machine weight (nw / gw)	kg	1000 / 1200
Packing dimension	mm	1800 x 1500 x 2240
Machine structure	-	C-type
Max. Current	A	25
Peak current setting (ip)	steps	6
Pulse on-time setting	steps	9
Pulse off-time setting	steps	9
High volts	steps	3
Power input	V	220 / 380 / 415
Max. Rating power	KVA	4

Accessories

Electrode pipe guide Ø 1.0mm	Yes
Electrode tube Ø 1.0mm x 10	Yes
Halogen work lamp	Yes
Tool box x 1	Yes
Filter x 2	Yes
Parallel block 1 set	Yes
X, Y, Z axis precision ball screw	Yes
Auto pressure release pump x 1	Yes
X, Y, Z axis precision servo motor	Yes
1μ 2 axis optical scale and LCD	Yes
X, Y, Z axis hand wheel	Yes
3.5" floppy or USB	Yes
RS232 transfer	Yes
Electrode auto change system	Yes
Collet	Yes

* The manufacturer reserves the right to modify the design, specification, mechanisms etc of the machines without notice, all the specifications shown above are just for reference.